Welcome to the Knowledge Hub
Discover all things tank related from technical terminology made easy,
to free downloads for our tank products. Updated regularly to ensure
you have the latest information.
Why not bookmark the Tricel Weston Knowledge Hub and use it as a daily resource for all of your tank projects?
Jump to
Did You Know?
Nominal Vs Actual Capacity
Tank Terminology and Glossary
Tank Size Calculators
One Piece Tank Info
One Piece Tank Sizes
One Piece Tank Downloads
Sectional Tank Info
Support & Clearance requirements
Sectional Installation Guidelines
Tank Components Poster
Technical Downloads
Top Downloads
Most requested downloads
All Downloads
Start scrolling now
Did You Know?
CPD Certified Course
Sectional Tank Information
One Piece Tank Information
LPCB Documents
Tank Tips & FAQS
Prolonging a Tank Installation
To ensure you get longevity of life from your tank installation, when conducting your annual clean in accordance with ACOP L8 & HSG274. Always check for any loose bolts before refilling.
Useful Links:
Warranty Statement
WARRANTY STATEMENT
All Dewey Waters Limited products are fully warranted in respect of workmanship and materials for twelve months from the date of installation for sectional tanks, and receipt of goods for all other products. Outside this period Dewey Waters Limited will investigate and rectify problems upon request but reserve the right to make a charge for these services to be determined at the time. Extended warranties are available by negotiation.
It would be expected under normal conditions of service that Dewey Waters Limited GRP potable water storage tanks and static associated peripherals would have a maintenance free service life in excess of twenty years. Moving parts, such as valves, would be expected to require servicing / replacement as recommended by the manufacturer thereof. Operation and maintenance statements for sectional and one piece GRP potable water storage tanks are available from Dewey Waters Limited.
What's a type AB air gap?
This is a non-mechanical backflow prevention arrangement. The water is discharged through an air gap which has at all times an unrestricted spillover to the atmosphere. This is required to protect the mains water supply from back siphonage of a category 5 fluid application such as Process, Medical or Grey water recycling systems.
What does TIF, IFB and EFB stand for?
They are all acronyms relating to the flanges of our sectional tanks.
- TIF – Totally Internally Flanged (all internal bolting)
- IFB – Internally Flanged Base (externally flanged sides)
- EFB – Externally Flanged Base (externally flanged sides)
What space do I need around my tank?
This will depend upon the type and height of tank you require, an approximate guide as follows:
- IFB under 2m high – 500mm on all 4 sides and 750mm* above
- IFB 2m > 3m high – 800mm on all 4 sides and 750mm* above
- IFB 3.5m & 4m high - 1000mm on all 4 sides and 750mm* above
- EFB under 2m high- 500mm on all 4 sides, 600mm underneath and 750mm* above
- EFB over 2m > 3m high- 800mm on all 4 sides, 600mm underneath and 750mm* above
- EFB 3.5m & 4m high - 1000mm on all 4 sides, 600mm underneath and 750mm* above
- TIF – 50mm on 3 sides, 500mm on 1 side and 750mm* above
*1200mm when fitted with a Guardrail
Please note the clearance above can be reduced to a minimum of 500mm with the inclusion of a ‘lift off kit’. The clearance around tanks over 2m can be reduced depending on site conditions. Please speak to our technical sales team on +44 (0) 1934 421477 for further information.
Why would I need a totally internally flanged tank?
Standard access requirements request a minimum clearance of 500mm around all four sides of the tank for assembly and maintenance purposes. With the TIF design these access requirements are reduced to 50mm on three sides and 500mm on one side. The tank may be positioned up against a wall or column, allowing space for other equipment within the plant room.
What is your maximum height tank?
This is currently 4m for Hot Press Sectional Tanks, 3m for our Totally Internally Flanged tanks and 2.2m One Piece Specials, however, we are always striving to develop our products and manufacturing methods.
What thickness of insulation do you offer?
38mm as standard (0.57w/m2/⁰C), 50mm (0.40w/m2/⁰C) is also available
Totally Internally Flanged Sectional Tank
25mm as standard (0.85w/m2/⁰C), 50mm (0.40w/m2/⁰C) is also available
25mm as standard, 50mm (0.40w/m2/⁰C) and 75mm (0.27w/m2/⁰C) are also available